Upgrades

Samsung Has Announced The 4.1.2 Jelly Bean Update For Its Device GT-S6310N The Official Update is Named XXAME2 The Update Is Available Through Kies And OTA For Hungary However If You’re Not Able To Update To Jelly Bean Through Above Methods You May Follow The Guide Given Here To Update, This Guide Does Not Need Any Third Party Apps On Your Device And Doesn’t Actually Need A Rooted Device. In The Guide Given Below We Use Odin 3.07 To Flash The Rom. There Won’t Be Any Problems If the Device Is Rooted but Since the Update Is Official the Device Will Be Unrooted After Successful Update
Below We Have Provided a Step By Step Guide to install XXAME2  Android Android 4.1.2 Jelly Bean  official firmware update on Samsung Galaxy Young GT-S6310N using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest XXAME2  Android 4.1.2 Jelly Bean  firmware but it always better to have a backup. Please Read Carefully All The Notes Provided since they are for your devices safety




Android 4.1.2 Jelly Bean  XXAME2  Firmware Details:

PDA: S6310NXXAME2
CSC: S6310NPANAME1
Version: 4.1.2
Date: May, 2013

Download Links To Required Files:
Odin 3.07 Program : Odin 3.07.zip

Caution!!
We at Ugrades write tutorial to guide you the right way to install. You should try this guide at your own risk. Neither we nor the developer should be held responsible if your Android device experience a damage after following this tutorial. Also remember, this guide is only and only for Samsung Galaxy Young GT-S6310N. Trying to flash any other device with this firmware will make your phone unusable and might also HARD BRICK your device

Pre Requisites:
As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.

#1            Backup Every Critical Data You Require Or The Data You Look Forward To Use, It Is Recommended To Copy All Your Internal Memory Data Into An External Storage Since We Don’t Want to take any chances of loosing data during the process
#2            Download And Install The Latest Drivers For Your Device, We Need This For The Odin To Detect The Device And Communicate
#3             Make Sure The USB Debugging Mode Is Turned On, To Do This Navigate To Settings>>Application Settings>> Development>> USB Debugging [Make Sure This Is Ticked] If You Are On Android 4.0 And Higher Navigate To Settings>>Developer Options>>USB Debugging [Make Sure This Is Ticked]
#4             Make Sure You Have Atleast 50% Of Battery Life s If The Device Shuts Down During The Flashing Process The Device Will Be Bricked And Therefore Making It Unusable So It Is Always Recommended To Have Atleast A Minimum of 50% Battery Life. However Since We Are Using Odin To Flash ROM You May Ignore This Cautionary Measure, the Device Will Be Connected To an Active Power Source throughout the Process
#5             The Guide You’re Following Is For Factory Unlocked Devices Only, If Your Device Is Contracted To A Carrier Please Don’t Follow This Method You Might Face Problems

Remember, it’s very important for you to follow everything that we mentioned below to successfully update your Samsung Galaxy Young GT-S6310N  to XXAME2  Android 4.1.2 Jelly Bean  firmware.

Note Before You Continue :

After Successful Installation of Firmware Your Device Will Be Unrooted Any Custom Recovery Installed Will Be Lost Forever Any Mods Installed Will Be Deleted/Replaced, Although the Device Can Be Re Rooted Manually
Again THIS GUIDE IS STRICTLY FOR THE DEVICE Samsung Galaxy Young GT-S6310N Confirm Your Device Model No By Navigating To Settings>>About Phone


Guide To Update Samsung Galaxy Young GT-S6310N To  Android 4.1.2 Jelly Bean  Official XXAME2  Firmware
Step 1: Download The XXAME2   Firmware Update File And Odin 3.07 Zip File To Your Computer

Step 2: Extract The Firmware Update File, You’ll Obtain A File With ‘Tar.md5’ extension And other optional files || Also Extract All Files From Odin 3.07.zip To Your Desktop [Or Anywhere]

Step 3: Turn Off Your Android Device Wait For Few Seconds Until The Device Vibrates To Confirm Complete Shutdown Next Put The Device in Download Mode By Pressing And Holding  Home Button + Volume Down + Power button together until you see a construction Android robot on your screen. Press Volume Up button for confirming to enter download mode
Step 4: Now Run Odin 3.07.exe On Your Computer With Admin Privileges [For Xp And Older Users Just Run The Program]


Step 5:Now Connect Your Device to Your PC via USB cable. After Doing So You’ll get a notification message [in ODIN Program] saying “Added!!”. However If You Don’t Get This Message You Can Either Try Different USB Port Or you may reinstall drivers for the device, Once you get the “Added!!” message in the Message box in the lower left corner you may Proceed to the next Step

Step 6: Select The Files In The Odin Interface From The Firmware Files You Obtained After Extraction:

#1)  Click on PDA button, and select the file with .tar.md5 Extension
#2)  Click the Phone Button, and select file with *modem* in its name [Ignore This Step If There Is No Such File]
#3)  Click the CSC Button, and select file with *csc* as its name [Ignore If Missing]
#4)  Click the PIT Button, and select the file with .pit extension. [Ignore If Missing]

Step 7: Now In Odin Interface Make Sure Auto Reboot and F. Reset Time checkboxes are Checked And Also Check Mark ‘Re-Partition’ checkbox if and only if you have selected a .PIT file in the previous step [Step 6 #4]

Step 8: Double Check Everything You Did In The Last Two Steps For Safety, And Once You’re Competely Satisfied Click The Start Button in Odin Interface and sit back and see the magic =)

Step 9: After the magic show of Odin and The Device your device will automatically Reboot Into the Stock ROM Android 4.1.2 Jelly Bean
Confirm This By Navigating To Settings>>About Phone
Note:
If Your Device Is Stuck On Boot Screen, Boot Into Recovery Mode  By pressing  and holding the Volume Up + Home + Power buttons together And  Wipe data/Factory Reset as well as Wipe Cache Partition, Next select on reboot now [Use The Volume Rocker to Browse Browse Through Options and Press Power button to select ]

If You Have Any Queries And If You Need Help Please Leave Them in The Comment Section Below! Or Email Them To Me at ugradesmail@gmail.com



Thank You For Visiting, Subscribe By Leaving Your Email ID
Like And Share
 
Top